Sale!

Original price was: $459.99.Current price is: $369.99.

Kenwood X3001-4 Class D 4-Channel Power Amplifier

Categories: ,

Description

X3001-4

X3001-4Class D 4-Channel Power Amplifier

  • Max Power 600W
  • RMS 50W x4 (4Ω)
  • RMS 75W x4 (2Ω)
  • RMS 150W x2 (Bridged)
  • Size (W) 213mm x (H) 53mm x (D) 149mm
  • High-Resolution Audio Certified
  • Variable High & Low Pass Filter
  • Bass Boost

Rich and Immersive High-Resolution Audio

High-Resolution Audio is high-quality sound that exceeds CD standard. High-resolution audio captures and beautifully expresses all the details of your favorite music. Through ultra-high and low frequencies, immerse yourself in a rich and high-quality sonic experience.


Smooth waveforms
Loss of smoothness
Fine waveforms

* The product with this logo is conformed to High-Resolution Audio standard defined by Japan Audio Society. This logo is used under license from Japan Audio Society.

Output Coil with Magnetic Shield

Prevents magnetic flux from radiating from the subwoofer’s coil, resulting in reduced noise and enhanced sound quality.

High Quality Capacitors

PMLCAP’s (Polymer Multi-Layer Capacitors) are utilized in the LC filter circuits to decrease distortion, ensuring clear detail for a truer to life sound.

Gauge-style terminals lock wire
into position with set screw for secure installation.

One-side Connection

All terminals and connections are on one side for easier installation and a cleaner look.

  • ①Fuse (20A x2)
  • ②Battery terminal (POWER IN BATT.)
  • ③Power control terminal
  • ④Ground terminal (GND)
  • ⑤Speaker output terminals (A.ch/B.ch)
  • ⑥Speaker level input terminal
  • ⑦Line in terminal
  • ⑧Input sensitivity control(A.ch/B.ch)
  • ⑨Bass Boost Level control (B.ch)
  • ⑩Filter switch (A.ch/B.ch)
  • ⑪Filter frequency control (A.ch/B.ch)

Speaker Level Input Harness

Speaker Level Input Harness is included to connect to speaker wires from factory installed receivers.

General Features

Amplifier Tech-Spec X8001-5 X5001-1 X3001-4
Maximum Output Power 1600W 1000W 600W
RMS Power at 4ohms 50W x 4ch +300W 300W 50W x 4ch
RMS Power at 2ohms 75W x 4ch +500W 500W 75W x 4ch
Bridged at 4ohms 150W x 2ch +300W 150W x 2ch
Frequency Response 20Hz – 50kHz 20Hz – (Upper Frequency is depends on Low Pass Filter) 20Hz – 50kHz
High Pass Filter 50Hz – 200Hz, -12dB/oct. 50Hz – 200Hz, -12dB/oct.
Low Pass Filter 50Hz – 200Hz, -24dB/oct. 50Hz – 200Hz, -24dB/oct. 50Hz – 200Hz, -12dB/oct.
Infrasonic Filter Yes
Speaker Level Input Yes Yes Yes
Signal Sensing Turn-on Yes Yes Yes
Signal to Noise Ratio 90dB 100dB 90dB
Dimensions (W x D x H)mm 248 x 169 x 53 213 x 149 x 53 213 x 149 x 53
Weight 2.1kg 1.5kg 1.4kg

Reviews

There are no reviews yet.

Be the first to review “Kenwood X3001-4 Class D 4-Channel Power Amplifier”

Your email address will not be published. Required fields are marked *